査読付き学術論文
    英文論文
  1. Numerical investigation of kink strengthening mechanism due to kink band in long-period stacking ordered magnesium alloy
    Yuichi TADANO
    Materials Transactions, Vol. 64, 1002-1010 (2023)
  2. Plastic flow direction of polycrystalline magnesium
    Yuichi TADANO
    Materials Transactions, Vol. 62, 88-97 (2021)
  3. Numerical study on bicrystalline micropillar compression using high-order gradient crystal plasticity
    Yuichi TADANO
    Key Engineering Materials, Vol. 794, 65-70 (2019)
  4. Forming limit analysis of hexagonal metal considering volume fraction of deformation twinning
    Tomoaki KOGA, Yuichi TADANO
    Key Engineering Materials, Vol. 794, 226-231 (2019)
  5. A three-dimensional formulation of phase field model representing polycrystalline solidification
    Kazuki SADAMOTO, Yuichi TADANO, Shigeki MORITA
    Key Engineering Materials, Vol. 794, 208-213 (2019)
  6. Meshfree analysis of higher-order gradient crystal plasticity using nodal integration
    Tota NIIRO, Yuichi TADANO
    Key Engineering Materials, Vol. 794, 214-219 (2019)
  7. Development of bifurcation analysis method for rate dependent materials
    Daiki TOWATA, Yuichi TADANO
    Key Engineering Materials, Vol. 794, 220-225 (2019)
  8. Superior energy absorption in porous magnesium: contribution of texture development triggered by intra-granular misorientations
    Tsuyoshi MAYAMA, Masakazu TANE, Yuichi TADANO
    Acta Materialia, Vol. 165, 62-72 (2019)
  9. Application of Finite Element Method to Analyze the Influences of Process Parameters on the Cut Surface in the Fine Blanking Processes by Using Clearance Dependent Critical Fracture Criteria
    Phyo Wai MYINT, Seiya HAGIHARA, Toru TANAKA, Shinya TAKETOMI, Yuichi TADANO
    Journal of Manufacturing and Materials Processing, Vol. 2, 26 (2018)
  10. Determination of the values of critical ductile fracture criteria to predict fracture initiation in punching processes
    Phyo Wai MYINT, Seiya HAGIHARA, Toru TANAKA, Shinya TAKETOMI, Yuichi TADANO
    Journal of Manufacturing and Materials Processing, Vol. 1, 12 (2017)
  11. Subsequent yield behavior of hexagonal metal with rolling texture
    Yuichi TADANO
    Key Engineering Materials, Vol. 725, pp. 220-225 (2017)
  12. Effect of lattice rotation on hardening behavior of HCP metal
    Takaaki KURISU, Yuichi TADANO, Seiya HAGIHARA
    Key Engineering Materials, Vol. 725, pp. 502-507 (2017)
  13. Quantitative evaluation of deformation twinning behavior in polycrystalline pure magnesium
    Takeshi SOEDA, Yuichi TADANO, Seiya HAGIHARA
    Key Engineering Materials, Vol. 725, pp. 214-219 (2017)
  14. A crystal plasticity modeling considering volume fraction of deformation twinning
    Yuichi TADANO, Yui YOSHIHARA, Seiya HAGIHARA
    International Journal of Plasticity, 84, pp. 88-101 (2016)
  15. Hydrostatic pressure dependent crystal plasticity by homogenization-based finite element method
    Yuichi TADANO, Seiya HAGIHARA
    ISIJ International, 56, pp. 700-707 (2016)
  16. Formability of magnesium sheet with rolling texture
    Yuichi TADANO
    International Journal of Mechanical Sciences, 108-109, pp. 72-82 (2016)
  17. Crystal plasticity analysis of development of intragranular misorientations due to kinking in HCP single crystals subjected to uniaxial compressive loading
    Tsuyoshi MAYAMA, Tetsuya OHASHI, Yuichi TADANO, Koji HAGIHARA
    Materials Transactions, 56, pp. 963-972 (2015)
  18. Molecular chain plasticity model similar to crystal plasticity theory based on change in local free volume and FE simulation of glassy polymer
    Hideyuki HARA, Hironori NADA, Yuichi TADANO, Kazuyuki SHIZAWA
    International Journal of Mechanical Sciences, 93, pp. 120-135 (2015)
  19. Investigation on intragranular stress of Mg including several twin-bands using dislocation-based crystal plasticity and phase-field models
    Ruho KONDO, Yuichi TADANO, Kazuyuki SHIZAWA
    Key Engineering Materials, 626, pp. 246-251 (2015)
  20. Effect of texture on plastic flow localization of FCC polycrystals using homogenization-based polycrystalline plasticity
    Yuichi TADANO, Naoki KUWASHIRO, Seiya HAGIHARA
    Key Engineering Materials, 626, pp. 450-455 (2015)
  21. A phase-field model of twinning and detwinning coupled with dislocation-based crystal plasticity for HCP metals
    Ruho KONDO, Yuichi TADANO, Kazuyuki SHIZAWA
    Computational Materials Science, 95, pp. 672-683 (2014)
  22. Anisotropic deformation induced by spherical indentation of pure Mg single crystals
    Hiromoto KITAHARA, Tsuyoshi MAYAMA, Keita OKUMURA, Yuichi TADANO, Masayuki TSUSHIDA, Shinji ANDO
    Acta Materialia, 78, pp. 290-300 (2014)
  23. Phase-field simulation of static recrystallization considering nucleation from subgrains and nucleus growth with incubation period
    Mayu MURAMATSU, Yoshiteru AOYAGI, Yuichi TADANO, Kazuyuki SHIZAWA
    Computational Materials Science, 87, pp. 112-122 (2014)
  24. Work-hardening behavior of polycrystalline aluminum alloy under multiaxial stress paths
    Kengo YOSHIDA, Asato ISHII, Yuichi TADANO
    International Journal of Plasticity, 53, pp. 17-39 (2014)
  25. Application of finite element method to analysis of ductile fracture criteria for punched cutting surfaces
    Toru TANAKA, Seiya HAGIHARA, Yuichi TADANO, Takuma INADA, Takanobu MORI, Kenji FUCHIWAKI
    Materials Transactions, 54, pp. 1697-1702 (2013)
  26. Plastic flow localization analysis of heterogeneous materials using homogenization-based finite element method
    Yuichi TADANO, Kengo YOSHIDA, Mitsutoshi KURODA
    International Journal of Mechanical Sciences, 72, pp. 63-74 (2013)
  27. Effect of microstructure on mechanical behaviour of castable refractories (analysis using image-based mesoscale finite element model)
    Hidetoshi KAMIO, Seiya HAGIHARA, Yuichi TADANO, Mitsuo SUGAWARA, Tsuneo KAYAMA
    Journal of Technical Association of Refractories Japan, 32, pp. 12-21 (2012)
  28. Quantitative re-examination of Taylor model for FCC polycrystals
    Yuichi TADANO, Mitsutoshi KURODA, Hirohisa NOGUCHI
    Computational Materials Science, 51, pp. 290-302 (2012)
  29. Analysis of shear droop on cut surface of high-tensile-strength steel in fine-blanking process
    Toru TANAKA, Seiya HAGIHARA, Yuichi TADANO, Shuhei YOSHIMURA, Takuma INADA, Takanobu MORI, Kenji FUCHIWAKI
    Materials Transactions, 52, pp. 447-451 (2011)
  30. Geometrically nonlinear analyses using 2-dimensional generalized finite element enriched by the quadratic deformation mode
    Yuichi TADANO, Hirohisa NOGUCHI
    Journal of Computational Science and Technology, 4, pp. 11-24 (2010)
  31. Polycrystalline behavior analysis of pure magnesium by the homogenization method
    Yuichi TADANO
    International Journal of Mechanical Sciences, 52, pp. 257-265 (2010)
  32. Influence of twinning deformation and lattice rotation on strength differential effect in polycrystalline pure magnesium with rolling texture
    Tsuyoshi MAYAMA, Kazuya AIZAWA, Yuichi TADANO, Mitsutoshi KURODA
    Computational Materials Science, 47, pp. 448-455 (2009)
  33. Improvement in formability of aluminum alloy sheet by enhancing geometrical hardening
    Kengo YOSHIDA, Yuichi TADANO, Mitsutoshi KURODA
    Computational Materials Science, 46, pp. 459-468 (2009)
  34. A phase-field simulation of nucleation from subgrain and grain growth in static recrystallization
    Mayu MURAMATSU, Yuichi TADANO, Kazuyuki SHIZAWA
    Materials Science Forum, 584-586, pp. 1045-1050 (2008)
  35. A triple-scale crystal plasticity simulation on yield behavior of annealed FCC fine-grained metals
    Eisuke KUROSAWA, Yoshiteru AOYAGI, Yuichi TADANO, Kazuyuki SHIZAWA
    Materials Science Forum, 584-586, pp. 1027-1032 (2008)
  36. Assessment of generalized finite elements in nonlinear analysis
    Yuichi TADANO, Hirohisa NOGUCHI
    Lecture Notes in Computational Science and Engineering, 57, pp. 235-247 (2007)
  37. A polycrystalline analysis of hexagonal metal based on the homogenized method
    Yuichi TADANO, Mitsutoshi KURODA, Hirohisa NOGUCHI, Kazuyuki SHIZAWA
    Key Engineering Materials, 340-341, pp. 1049-1054 (2007)

    38. 和文論文
  38. 双晶の組織形成を考慮したHCP結晶に対する転位-結晶塑性モデリングおよびシミュレーション
    近藤瑠歩, 只野裕一, 志澤一之
    日本機械学会論文集A編, 78, pp. 1157-1172 (2012)
  39. 有限要素法を用いた打抜き加工における切断面の延性破壊判定に関する考察
    田中徹, 萩原世也, 只野裕一, 吉村修平, 稲田拓真, 森孝信, 渕脇健二
    塑性と加工, 52, pp. 56-60 (2011)
  40. サブグレインからの核生成と核成長に関する静的再結晶Phase-Fieldシミュレーション
    村松眞由, 味岡秀恭, 青柳吉輝, 只野裕一, 志澤一之
    材料, 59, pp. 853-860 (2010)
  41. トリプルスケール結晶塑性モデリングおよび結晶粒微細化に伴う寸法効果に関するシミュレーション
    黒澤瑛介, 青柳吉輝, 只野裕一, 志澤一之
    日本機械学会論文集A編, 76, pp. 483-492 (2010)
  42. 高張力鋼板のファインブランキングプレス加工におけるダレ量に関する考察
    田中徹, 萩原世也, 只野裕一, 吉村修平, 稲田拓真, 森孝信, 渕脇健二
    塑性と加工, 51, pp. 50-54 (2010)
  43. 不定形耐火物の機械的挙動に及ぼす微構造の影響（イメージベースメゾスケール有限要素モデルによる解析）
    神尾英俊, 萩原世也, 只野裕一, 菅原光男, 加山恒夫
    耐火物, 61, pp. 537-547 (2009)
  44. 非晶性ポリマの分子鎖多絡み点を考慮した分子鎖塑性モデルおよび変形誘起異方性に関する大変形FEM解析
    灘裕統, 只野裕一, 志澤一之
    日本機械学会論文集A編, 74, pp. 961-970 (2008)
  45. 二次モードを追加した一般化平面要素による幾何学的非線形解析
    只野裕一, 野口裕久
    日本計算工学会論文集, 2006, 20060016 (2006)
  46. 面内回転自由度を考慮した二次元一般化平面要素による幾何学的非線形解析
    只野裕一, 野口裕久
    日本計算工学会論文集, 7, pp. 119-127 (2005)
  47. 二軸応力制御による薄肉管材の塑性不安定解析
    只野裕一, 野口裕久, 黒田充紀
    日本機械学会論文集A編, 70, pp. 1499-1506 (2004)